Coggin Acura Fort Pierce

Acura MDX ABS and Brake Light

Acura MDX ABS and Brake Light service at Coggin Acura Fort Pierce in Fort Pierce, FL

Frequently asked questions
2026 Acura MDX shown

On an Acura MDX, an amber ABS light means the anti-lock system has switched itself off, while a red BRAKE light can indicate an applied parking brake, low brake fluid, or a hydraulic fault. Normal braking may remain with the ABS light alone, but the wheels can lock during a hard stop. If both lights are illuminated, or the red light appears with a soft pedal, the vehicle should not be driven. Coggin Acura Fort Pierce provides ABS and brake light diagnosis for Acura MDX models in Fort Pierce, FL, helping drivers identify whether the warning involves a wheel-speed sensor, brake fluid, brake pad wear, the parking brake switch, or another brake-system concern.

Coggin Acura Fort Pierce is located at 4400 U.S. Hwy. 1 South, Fort Pierce, FL 34982.

What the ABS and brake lights mean on an Acura MDX

The amber ABS warning light may stay on after the Acura MDX starts when the anti-lock braking system has switched itself off. Most often, the system has detected a wheel-speed sensor fault. Normal braking remains, but the wheels may lock in a hard stop, making the warning important to diagnose. The red BRAKE light, or a circle with an exclamation point, has a different meaning. It may remain illuminated when the parking brake is released because the brake fluid is low or the hydraulic system has a fault. Low fluid usually points to worn brake pads or a leak. A red light with a soft pedal, or both the amber ABS and red brake lights together, means the vehicle should not be driven.

What the diagnosis covers at Coggin Acura Fort Pierce

ABS and brake light service begins with a scan of the anti-lock brake module for stored trouble codes. The inspection then tests the wheel-speed sensors, their wiring, and the tone rings that support the sensor readings. Brake fluid level and condition are checked along with brake pad wear and the parking brake switch. This process traces the warning to a sensor, fluid concern, pad condition, or related brake-system issue instead of guessing at the cause. Drivers with an amber ABS light, red BRAKE light, unusual pedal travel, or wheels that lock in a hard stop can schedule service at Coggin Acura Fort Pierce.

Recalls on the Acura MDX

NHTSA 18V777000 covers 2017–2019 Acura MDX vehicles with rear brake caliper pistons that may have insufficient coating, allowing gas pockets to form and reducing brake performance. The reduced braking performance increases the risk of a crash. Coggin Acura Fort Pierce checks open recalls by VIN and performs the recall remedy at no charge to the owner; for this campaign, Honda or Acura dealers bleed the brakes.

Booking at Coggin Acura Fort Pierce

The visit includes an anti-lock module scan and inspection of the ABS and brake systems, including sensors, wiring, tone rings, fluid, pads, and the parking brake switch. Drivers can schedule service online or contact Coggin Acura Fort Pierce at (772) 742-4342. The dealership is located at 4400 U.S. Hwy. 1 South, Fort Pierce, FL 34982.

Frequently Asked Questions

5 common questions answered

What does the ABS light mean on an Acura MDX?The amber ABS light means the anti-lock system has switched itself off.

Normal braking remains, but the wheels can lock during a hard stop. A wheel-speed sensor fault is the most often named reason for this warning and should be diagnosed.

What is the difference between the amber ABS light and the red brake light?The amber ABS light concerns the anti-lock system, while the red brake light can indicate a parking brake, fluid, or hydraulic-system issue.

The red light may remain on with the parking brake released when brake fluid is low or the hydraulic system has a fault. Low fluid usually points to worn pads or a leak.

Is it safe to drive with the ABS light on?The vehicle should not be driven if both lights are on or if the red brake light appears with a soft pedal.

With only the amber ABS light, normal braking remains, but the wheels can lock in a hard stop. The warning still calls for prompt diagnosis.

What usually causes the ABS and brake lights?The named causes include a wheel-speed sensor fault, low or concerning brake fluid, worn pads, a leak, a parking brake switch issue, or a hydraulic fault.

The diagnosis checks the anti-lock module, sensor wiring, tone rings, fluid, pads, and parking brake switch to trace the warning.

How do I book ABS and brake light service at Coggin Acura Fort Pierce?Drivers can schedule service online or call (772) 742-4342.

Coggin Acura Fort Pierce performs the anti-lock module scan and brake inspection at 4400 U.S. Hwy. 1 South, Fort Pierce, FL 34982.